Why do we need a backup audio file? So, -27dB, -24dB, -21dB and so on until we are back at 0db. Headphone monitoring Using the USB-C output frees up the 3.5mm output so you can plug your headphones in and monitor your audio while recording. When you press the gain button, whichever channel is selected will be muted. All 3 of these devices power on in the same way. Standard USB-C to Lightning cables are not compatible with the Wireless GO II. This button has 3 settings. Once turned on, they will automatically pair to the receiver.

Pressing this button moves between gain levels. Again, as we talked about earlier, Coarse gives you 3 gain settings, while Fine gives you a greater gain range and greater number of gain settings. Once you switch on the devices, one or both of the transmitters should automatically connect to the receiver wirelessly, depending on how many you are using. The gain control is found on the receiver. So, you have to be really careful you or the talent doesnt accidentally mute the mic and not realise until its too late. The Wireless GO II utilises RDEs all-new Series IV 2.4GHz digital transmission with 128-bit encryption. If its not in merge mode, the safety channel button will be disabled. Compared to the very cheap wireless mics I talked about in another video, the Rode Wireless GO II is much quieter. First, you need to connect the transmitter to RDE Central and click the cog icon. This should take a few seconds. Once you click export, you can choose where on your computer you want to save the file. The receiver connects to your camera or smartphone using a cable. As a result, users want to fix the bug as soon as possible. My phone still recognised another USB C mic, just not the RDE. You can switch this to Marker, so every time you short-press the backlight button (which is actually the power button on the top) it will place a marker onto the audio track. How To Record Two Microphones Into Your Camera, Configuring the on-board recording function, Unlocking advanced features, including the safety channel, fine gain control and more. Each device has a USB C port. These are sensitive microphones that are designed to pick up sound from all around in great detail. Next button dims the brightness of the LEDs on the transmitter. It also works well if you are using the Wireless GO II in a live presentation setup. All wireless devices seem to face hiccups in the pairing process at some point in time. But if you have this safety channel recording at 20dB lower, youll be able to use that instead of the distorted audio. Sometimes, people forget the simplest of the steps and get worked up. Click to switch to Always or Backup. A low equivalent noise level is particularly important in a studio situation, where background noise becomes more apparent. Ill go into all that in more detail later, but first lets get started with the basics. If the gain is set to coarse, the gain button will only switch between 3 settings: 0dB, -12dB and -24dB. So you may want to delete files and to do that you just click the red trash can button. This means you could add an additional transmitter at a later date if you wanted. photoinduced But to get more functionality from this setup, we need to dig a bit deeper. Other than that, I have found it to be easy to use and produces great quality sound. This essentially turns the Wireless GO II receiver into a wireless USB audio interface. However, theres lots of settings you can play around with, as well, to get the system working in different ways. The next button switches between Split or Merged mode. However, I used the charging cable from my Samsung smartphone and it works fine. With a camera, you will more likely be using the 3.5mm output rather than the USB C, depending on your camera. You can also use the all and none buttons here to select every file or to deselect everything quickly. As mentioned, clicking the pair button on the receiver will allow you to cycle between the two transmitters. Or you might want a different setup for different projects. Not sure why were still getting USB A cables, when I believe most of us are now using USB C. Most smartphones now ship with a USB C charger, which means the cables that come with this wont fit the charger. It is easy to carry which makes it an ideal choice for creators. microphones Like I said earlier, the RDE Wireless GO 2 transmitter can also be used as a stand alone field recorder. 2) If your devices are switched on and the Rode pairing error persists, ensure that you are holding the pair button for at least 3 seconds on the receiver. The Wireless GO II can be recharged using the supplied USB cables. Recently, RDE released a version of the Wireless GO 2 with only 1 transmitter for solo creators, called the RDE Wireless GO II Single. Pad stands for Passive Attenuation Device and is used in microphones to avoid loud audio causing distortion. Use the supplied USB-C to USB-A cable to connect the Wireless GO II receiver to any computer with a USB-A input (use USB-C to USB-C cable for computers with a USB-C input), then go to your audio settings and select Wireless GO II RX as your input device. The bottom setting gives you a choice between 24 bits pcm or 32 bits float. So most of what Ive just shown you can also be done on your smartphone. The setting we want here is Always. This delivers an extended transmission range of 200 metres (line of sight). Instead, if you want the transmitter power button to act as a mute button you need to use the RDE Central software. If you want to join me there, follow this link. Connecting the receiver to RDE Central will allow you to change the way your receiver operates. The Wireless GO II features two transmitters and a dual channel receiver that allows you to connect both transmitters for recording two sound sources into a single device. The nearer you place the mic, the more background sounds and echoes are reduced and the better quality your audio will be. The receivers LED screen is split into four main sections, with icons for battery life, signal strength and input level displayed for each transmitter on the bottom left and right, and icons for battery life, backlight mode and output gain for the receiver in the middle. A smaller, regular clip on mic is much easier to hide in the speakers clothes. The head of the mic is flatter than the original version. The audio recording should be saved inside for you to access later.

This might be handy if the light from the transmitter is causing a problem with the shot. The first button on the left, called Record, is the one were looking for. The Rode pairing error can be easily fixed at home by yourself by following some basic steps. if audio is recorded too quietly, when we come to mix the audio in our editing software we need to push up the gain. Members can also access all 5 episodes of our smartphone shot Silent Eye series, with accompanying screenplays and making of podcasts. Theres 3 USB A to USB C cables, for charging and connecting the devices to smartphones or computers. This software is also available as an app for iOS and Android. Of course, you only need these windshields if you are using the inbuilt mics. But you could use an even better quality mic here, if you wanted. I believe RDE has changed this because, unfortunately, when you use the transmitter power button to mute the mic, theres no indication its muted. Once updated, they should connect to RDE Central Mobile on your smartphone. Theres a second way to mute RDE Wireless GO 2 mics, using the transmitter instead. An additional fine gain control mode can also be enabled in the RDE Central app. Rode Wireless Go 2 is pretty much flawless in terms of features, but it isnt immune to the pairing issue. If a transmitter loses connection with the receiver, the blue LED on the transmitter will flash and the icons for that channel will go blank on the receiver, making it easy to identify which one you need to reconnect. But there is a slight complication. If you want to be able to adjust the volume of each voice separately, this is not the mode to choose. There are 3 fur windshields for filming outside in windy conditions. The backup recording is made directly to the unit without using wireless, so it wont be affected by any connection failure. As well, you can rename files just double-click and start typing. When I switch on both transmitters, both audio level meters start moving. Its the button which has that same connection symbol we saw on the transmitter. At the forefront of a new wave of filmmakers, MoMo provides a level playing field for filmmakers, where talent, creativity and hard work counts more than budget and industry connections. Now connect the receiver to a smartphone with the RDE Central Mobile app. Therefore, we want to try to record audio at a level so that it does not go above 0dB. Each further click then increases the gain by 3dB. Then, there will be different settings to change, depending whether you connect the receiver or one of the transmitters. If you need to reconnect a transmitter to the receiver, press and hold the pair button () on the receiver for three seconds to enable pairing mode, then single-click the power button on the transmitter and wait a few seconds. Once downloaded and installed, connect each unit and, if this is the first time, it will ask if you want to update the firmware. This is the default function of the transmitter power button and can be changed via RDE Central (read more about this here). Align the 2 white dots with the marks on each side of the microphone. But that shows how good this system is. RDE Central is an easy-to-use desktop and mobile companion app for the Wireless GO II that allows for complete device configuration anywhere, including: It also allows you to optimise and export the on-board recordings, access device information, and update to the latest firmware. MARKER means a single click will add a marker to the audio. Below the quality selection tool, you will find an indicator showing you how much space has been used up by recorded audio. What is the difference between dual and single? To attach them securely, align the two white dots on the windshield with the black dots on the receiver, then push the windshield down and twist to lock it in place. Once connected, press the power button to mute and again to unmute. The main issue with wireless microphones is a loss of connection. Here, Im using the RDE Lavalier II which is specifically designed to be easier to hide. When paired to the receiver, single-click the transmitter power button to mute and unmute. Note that the gain control only affects the 3.5mm output of the Wireless GO II, not the digital USB-C output. To turn on your Wireless GO II, simply press and hold the power button on the receiver. There are some useful settings as well as access to any audio files youve recorded directly onto the units storage. To switch between 'Merged' and 'Split' mode, press and hold both buttons on the receiver for three seconds and keep an eye on the output level meter on the LED screen. 3) If the Rode pairing issue persists, ensure that both the devices, that is, the microphone as well as the other device are in working condition. Immediately, you should see the audio level bars moving on the receiver to show that its receiving audio from the transmitters inbuilt mic. Now, if we click the cog icon, we bring up the transmitters settings. As we click through, we can see the blue line growing until we have a full line. So thats really how simple it is to get started recording with this mic and a smartphone or a camera. Before you get started, I recommend charging each device. The Wireless GO II comes with three furry windshields. So, if you do connect a transmitter, the app will take you directly to the setting controls. So, if you are recording something like an event, or a situation where you cant cant retake the audio, I would make sure to capture audio internally to the transmitter as well as the camera. When using the gain controller on the receiver, the RDE Wireless GO 2 can be set to audio level from 0dB to -30dB. The RDE Central software can be downloaded from the RDE website. Theres also my Exploring the Film Look Guide as well as Smartphone Colour Grading. Apart from exporting audio files, you can select and play audio files here, as well as navigate between any markers youve placed. The RDE Wireless GO 2 is pretty simple to use, straight out of the box. In the middle, we are given 3 bits of information: the battery life, backlight mode and output gain for the receiver, indicated by a thin blue line. This is a three-stage pad that cuts your output level in 12dB increments. Split means each mic will be recorded to a separate channel, which is recommended if you want to separate audio for each speaker. This is a three-stage pad that cuts your output level in 12dB increments. Next, clip the added mic near the speakers mouth. When you connect a unit, you will see some indication its connected. Just feed the cable under clothes and hide the mic head under something like a shirt collar or behind a tie. If you need to connect your microphone to a device with an XLR input, use an adaptor like the VXLR Pro. Find the button which has a distinctive , the one with the line through it that RDE uses in their name. My experience of the RDE Wireless GO 2 is so far mostly good. In the UK, it seems to be only about 50 cheaper. The book is 170 pages long and covers essential smartphone filmmaking topics: Things like how to get the perfect exposure, when to use manual control, which codecs to use, HDR, how to use frame rates, lenses, shot types, stabilisation and much more. To disconnect a transmitter, select it by single-clicking the pair button, then press and hold the pair button for three seconds. To pair your transmitters to the receiver, press and hold the power button on the transmitters one at a time. Use the supplied SC5 cable to connect your Wireless GO II to cameras and other devices with a 3.5mm TRS input. Note this will only work when the transmitters are turned on and paired to the receiver. Adding a marker for a different scene, change of subject or new shot can save time when you want to find them later. Or you could even record onto a separate field recorder, like a Zoom H4n. Now, 32 bits floating files are said to be 50% bigger and a seasoned pro will most likely tell you this file type is a bit over the top for regular sound work. This is because cameras often have noisy preamps, as we talked about earlier. Therefore, recording good audio is usually about finding a nice balance not too loud and not too quiet. How much it moves depends on how we have set up the gain control, using the RDE Central software. Now you have a grounding in how the system works, lets power on the devices. However, in this case you would need a XLR to 3.5mm TRS cable. The next button is called Pad and allows you to alter the mics sensitivity. If its not connected it it will flash on and off. The small sun icon indicates if power saver mode is engaged or not (full = disengaged). Please note that mute control via the transmitter only functions when the power button is configured to 'Mute' mode. The gain controller is a button on the bottom of the receiver, with the microphone and the letters dB beside it. If you reach the limit, the transmitter will simply start wiping over old files. This allows you to connect and disconnect the transmitters and also mute them. As a result, the users are unable to use their devices. To connect the Wireless GO II to a smartphone or tablet, you will need additional cables. These have been completely redesigned to ensure an extremely strong connection and will not fall off your transmitters, even with vigorous use. This is the article where you learn everything you need to know about your RDE Wireless GO 2 microphone system. So go ahead and update. While you can use the RDE Wireless GO 2 transmitters inbuilt mic, you also have the option to connect a mic to the transmitter. 1 x Receiver, 2 x Transmitters, 3 x Furry Windshields, 3 x SC20 USB-C to USB-A Cables, 1 x SC5 TRS to TRS Memory Cable, 1 x Carry Pouch.

This is useful when the speaker or presenter wants to mute themselves. Basically, you might not like the look of the receiver. The error will continue unless both the devices are working properly. For iOS devices with a Lightning input, use the SC15or SC19. A single click will select transmitter 1, a second click will select transmitter 2, and a third click will exit the channel selection. Lets look at the mini screen and find out what information were getting here. This allows you to record each transmitter onto separate channels on the output or combine the two into a single output. Many users have reported that they are unable to pair their microphones with other devices. As well, you can get adapters like these quite cheaply, which convert USB A to USB C. After charging, each unit should last up to 7 hours. For this article, Ill be using the dual version but, as I say, the single version works exactly the same. dditional fine gain control mode can also be enabled in the RDE Central app. For more information on how to import and separate your audio in post-production, check out this blog post on How To Record Two Microphones Into Your Camera. I was also able to connect the device to my laptop using this cable. You will now see a grey square around the 1st mic on the mini screen. We understand that users face difficulty using their microphones due to the Rode pairing error. One click places the grey square around channel 1. However, if your receiver is set to coarse gain you will see a triangle here. While the external mic is plugged in, the inbuilt mic will be switched off. All rights reserved, Master Your RDE Wireless GO 2 Dual & Single - Tutorial Review, Smartphone Videography Beginners to Advanced, Zhiyun Smooth 5 vs Crane M2 S vs Crane M3 as Smartphone Gimbals. Press and hold until it powers on. Each transmitter features a high-quality in-built omnidirectional condenser capsule. If you have safety channel enabled, rather than using the left and right channel of the stereo audio to separate the mics, instead the receiver records the exact same audio onto both channels, except one channel records 20dB lower. The level icon in the middle of the screen indicates which gain setting is selected. As well, some battery power will be saved. Note: OS Requirements MacOS 10.14 or later; Windows 10 Version 1803 or later; iOS 14 or later; Android 9.0 or later. From the app you will see which transmitters are connected, as well as change settings. When set to Record to Backup, the transmitter will immediately start recording when its connected to the receiver and stop again as soon as it is disconnected. If you are short of space, tight on budget, but need a good-quality wireless microphone, then the Rode Wireless microphone should be your first pick.

Firstly, my Samsung briefly stopped recognising the mic when I connected the receiver. Bear in mind, a unit doesnt have to be switched on when you connect it. You can still use the Wireless GO II while it's charging. To export one or more audio files, select the audio files you want to export and then click export. If were recording audio for social media or low budget movies, 22dBA is good. If you have only selected one file, you get the option to rename the audio file. Below the main audio level meters, we have mics 1 and 2 on the left and right. Try these simple fixes and workarounds and we are sure that your Rode pairing error will be resolved.

This means that each transmitter's output is being recorded onto separate channels (left and right) on the Wireless GO IIs output, which can be processed individually in post-production. The problem is, theres often a low level of noise created when recording, and when we then push up the gain later, this noise is also pushed up and becomes more audible. When enabled, this will turn the LED backlight off after 10 seconds of inactivity. 2 blue LEDs light up at the top of the transmitter. The RDE Wireless GO 2 system uses a 2.4 GHz radio band, which is used by many other things, such as cordless telephones, bluetooth and wifi. Master Your RDE Wireless GO 2 Dual & Single Tutorial Review. You can see each light has an icon beside it connection and power. For comparison, DJI say their new wireless mic setup (which is considered a direct rival) has 23dBA, so virtually the same. To connect a microphone to the RDE Wireless GO 2, use the 3.5mm port on the top of the transmitter. You can also mute via the transmitter. I actually found it quite hard to test this function because the connection between the transmitter and receiver was so strong. Meanwhile, on the transmitter the info from that transmitter will go blank. Pairing the microphone with a gadget is essential for its working and connecting to other devices. Secondly, Andrea recorded a 20 minute audio track using only the transmitter as a stand alone recorder and the device created a file, but there was no audio on it. Top left we have the backlight control, which just switches between normal and battery saver mode, as weve seen earlier. In fact, it doesnt completely switch off, rather it dims to save power. If you simply tap on the button or leave it too soon, it wont enable the pairing mode. I will be using this a lot over the coming months, so I will let you know if this turns out to be a RDE issue. Then I found that by opening the app and connecting the mic, then opening the camera, this resulted in my phone recognising the RDE mic again. This might happen if you move too far from the receiver or there are obstacles between them. This is great if youre only using one transmitter and want the audio recorded onto both channels of your recording device, or if you are using the safety channel (see below for more information). The Wireless GO II is MFi-certified, meaning it will seamlessly interact with any iOS device. The wireless microphone is cheaper than a normal microphone and is, therefore, a great choice for people on a budget. But you dont have to worry. This means they can be used to record a backup audio (for safety reasons) or you can even use the transmitter as a stand alone recorder.

Sitemap 36